Free Oak Park Box Jig plans - I have Bench Dog router table and had purchased the Oak Park 1/4 and 3/8 box joint jigs for it. Since more than likely if you are using other than an Oak Park table, you will have to set it up and drill holes in the top of your router table. It was suggested by another member that I photo this process for the benefit of others so here goes. It will take me a couple posts here to get all the photos loaded up. Note I am installing the 1/4 inch jig.
Based on your interests, we recommend you also see:
Gate Leg Table Here is a woodworking project for a gate leg table. This table is spacious, but...
Small Entertainment Center Complete instructions on how to build a small entertainment center with room for...
Deck Cooler Table This easy-to-build deck cooler table hides away cold drinks and serves snacks...
Free Oak Park Box Jig plans - I have Bench Dog router table and had purchased the Oak Park 1/4 and 3/8 box joint jigs for it. Since more than likely if you are using other than an Oak Park table, you will have to set it up and drill holes in the top of your router table. It was suggested by another member that I photo this process for the benefit of others so here goes. It will take me a couple posts here to get all the photos loaded up. Note I am installing the 1/4 inch jig.
