|
| Details for Matts Media Cabinet Plans
 Free Matts Media Cabinet plans - A custom build designed by Matt himself! This cabinet is totally customizable – Matt used the actual measurements of his media components to determine the size of his cabinet. Apply edge banding, if desired, after each piece has been cut. Cut the pieces for the top, bottom, and dividers. Set the Kreg jig for ¾ inch material and drill pocket holes in the 18 inch ends of the dividers. Attach one divider to each side of the bottom with glue and 1-1/2 inch pocket hole screws. Attach top in the same manner keeping in mind that each end of the top will overlap the sides by 1 inch. Check for square, then insert the remaining dividers at the spacing indicated in the drawing
|
|
