|
| Details for Tenon Jig Plans
 Free Tenon Jig plans - A great jig for cutting tenons on your table saw. It is also very handy to use on a drill press. This handy tenon jig was designed to securely hold the workpiece for cutting tenons on the table saw or the drill press. A combination of T-Track, hold down clamps, toggle clamps, and stop blocks permits you to clamp the work piece in the desired position so your cuts are accurate and true. Simply set the stop blocks to allign the piece for the cut and clamp with a couple of toggle clamps or hold down clamp as shown above. The home made stop blocks shown below will work for most of the cuts you will need to make. Plus, it is easy to make a custom stop for any odd shapes you may need to work with. This tenon jig is simple and easy to make and use. Our free PDF format plans provide detailed drawings and instructions for building this very versatile tool. Note: The red colored surface you see in the picture is medium grit sandpaper glued to the jig surface. Sandpaper on the surface increases the holding power of the clamps.
|
|
