Music Stands and Instruments Plans
| Search Free Plans
 |
Huge Collection of Woodworking Plans
|
When I built my first deck, almost 20 years ago, I thought I had it all figured out. 4 exhausting months later, I still was not done - I thought I had every detail measured out, only to find that I have got it all WRONG. So I decided to find a... |
Details |
 |
Acoustic Guitar |
Following this package of five video tapes I have successfully built my first acoustic guitar, an auditorium style similar to Martin's 000 size. It has East Indian rosewood back and sides; Sitka spruce top and bracing; mahogany neck, kerfed... |
Details
|
 |
Banjo |
Here is a brief description of my building process. In addition to these instructions, you should also purchase Don MacRostie's Mastertone banjo blueprint and Roger Siminoff's book, Constructing a 5-String Banjo. Both are available from Stewart... |
Details
|
 |
Dead Ben Drums |
Drums are primitive. Drums are complex. My journey through building snare drums has been a study in bringing the manufacture of the most ancient instrument up to speed with the advanced manufacturing technologies of today. There are many caveats... |
Details
|
 |
DIY Alcove Hanging Guitar Rack |
So, here was the problem – over the years I have accumulated a few guitars and I did not have anywhere to keep them where they would not be in the way when not being used. I did have an alcove that was not being used for anything in... |
Details
|
 |
DIY PVC Multiple Guitar Stand |
Height is 32 inches. Width is 27 inches. Front/back is 32 inches. I started by building the base first. I used 4 elbows on the ends to give it a slight off the floor elevation. Here is an example pic the one side of the base. I have dry-fitted the... |
Details
|
 |
Door Harp |
I've always wanted to make a door harp but just have never gotten around to it. I thought this would be a simple one weekend project but it's turned into much more. |
Details
|
 |
Easy to Make Guitar |
A guitar having straight lines, giving it an old-fashioned appearance, can be made by the home mechanic. If care is taken in selecting the material and having it thoroughly seasoned, the finished instrument will have a fine tone.The sides, ends,... |
Details
|
 |
Elk Guitar |
Playing guitar, woodworking and outdoor activities are my interests, and they all came together in this acoustic guitar. I used African mahogany for the back, sides and neck and Indian Rosewood for the head veneer, fret board and bridge.... |
Details
|
Number of links: 24 |
Free-Plans.com is a free plans search engine and does not host any of the files.