Workshop Pushsticks and Pushblocks Plans

Search Free Plans



Simple Garage Or Outdoor Building Plans
There is a dirty conspiracy going on for years where companies are charging hundreds of dollars just for one simple garage plan. Today I am about to do something that is radically different than has ever been done before. I am going to allow you...
Details

Bandsaw Push Stick
A long reach keeps fingers safe when resawing. This stick is made from 1⁄2-in. plywood, and the shape is cut on the bandsaw. Edges are rounded over with a rasp or router.
Details

Heavy-Duty Push Block
I find many push sticks somewhat unnerving to use. So I made a sturdy push block for my table saw that keeps my hand well above the blade. And the wide body of the block pushes the workpiece on both sides of the saw blade.
Details

Hi-Tech Push Blocks
I'm one of those woodworkers who believes you can never have too many push blocks lying around. In fact, I have a few at my table saw, another at the jointer, and at least one more at my router table. This week's tip isn't a new push block design,...
Details

PUSH BLOCK
Push blocks and push sticks are invaluable tools for the table saw and joiner. These accessories help keep your hands away from the blade and out of harm's way when cutting.
Details

Push Block
Nearly all of us have a good supply of push-sticks for the tablesaw, bandsaw or router table. However we may not have or use push-blocks to their full extent. A push-block is simply a square or rectangular block of wood, with a handle, that is...
Details

Push Blocks for the Jointer
When flattening boards, use a broad, flat push block. The cleated design is used in the right hand, at the board’s trailing edge, to feed the work into the cut. The padded block is used in the left hand, to keep the board from bouncing as it...
Details

Push Stick
If one thing should be on your list it definitely a push stick. Do not limit yourself to one model but ratter to deferent shape for various application. The push stick can be built from scrap wood such as pieces of plywood. The push stick is very...
Details

Push Stick for the Tablesaw
Use a push stick for safer rip cuts on the tablesaw. All you need is a simple plywood cutout.
Details

Router Table Push Stick
This stick is made from 1⁄2-in. plywood, and the shape is cut on the bandsaw. Edges are rounded over with a rasp or router.
Details

Number of links: 9