Free Dog Theme CD Rack plans - Use any 3/4 inch thick material, pine was used for the one in the picture, finish as desired. The pattern for the body parts is here, print the page in landscape mode at 100%. Make sure that the grid has 1 inch squares when it is printed out. Cut two each of the front and back legs, rip a short length of 2 inch wide 3/4 inch thick material in half so you have two pieces 3/8 inch thick for the ears. Cut two back pieces as shown below from 3/4 inch thick material.
Based on your interests, we recommend you also see:
Folding 3-Legged Table Build this handy folding table that has a round top and a center pedestal with...
American Gothic Playhouse The design of this playhouse includes 35 square feet of interior space plus a...
Arched Bridge The walkway is easy to construct because you use ground contact treated lumber....
Free Dog Theme CD Rack plans - Use any 3/4 inch thick material, pine was used for the one in the picture, finish as desired. The pattern for the body parts is here, print the page in landscape mode at 100%. Make sure that the grid has 1 inch squares when it is printed out. Cut two each of the front and back legs, rip a short length of 2 inch wide 3/4 inch thick material in half so you have two pieces 3/8 inch thick for the ears. Cut two back pieces as shown below from 3/4 inch thick material.
