Details for Wood Guitar Stand Plans


Wood Guitar Stand Plans

Category:Music Stands and Instruments
Date added:2011-09-08
Rating:average rating: 1.00 (6 votes)
Wood Guitar Stand plansFree Wood Guitar Stand plans - I built this as an alternative to the rubber-coated metal stands, to avoid damage to nitro-finished guitars. It is made of poplar board and assembled with wood screws and bolts for disassembly. This is similar to others, except I moved the neck support back so that the necks would tilt back, thus avoiding the need for restraints. The base was the hardest part. My initial design had these two base supports mounted so that they could rotate. That did not really work and this configuration was a compromise that seemed to work for the various types of guitars I had. This version had the felt, but later that was replaced with carpeting to help prevent the guitar bodies from rotating in the stand. The neck support is the most difficult piece to make, since it involves a lot of hand shaping. Later, I put the felt on the entire front surface.

Post a comment